The best sheds for storage make it easy to put your largest item away and get it back out—not just fit it on paper. A riding mower calls for a different doorway and floor plan than garden tools or patio cushions. These 10 picks cover compact vertical cabinets, deeper resin sheds and larger metal options. Start with the equipment you own, the ground available for a foundation and the space needed to swing the doors. Then decide whether an included floor, ventilation or room for shelving matters most.
We prioritized usable access over nominal shed size: doorway clearance, interior depth and the route to the shed matter as much as advertised capacity. We also considered whether a floor is included, how the doors and storage features suit the intended gear, and what the product listing or manufacturer documentation says about materials, assembly and weather-related limits. Resin is useful for shoppers seeking a low-maintenance shell; metal provides another choice of structure but makes floor and corrosion details especially important. Each pick has a defined use case and a tradeoff to check before ordering.
Top-rated Comparison
For riding-mower and mixed-gear storage, with wide-opening doors and an included floor; it needs substantial yard space.
For a push mower or bikes where yard depth is limited; its 39-inch interior depth still needs checking against your gear.
For a push mower or adult bicycle you want to move straight inside; its deeper footprint takes more site space.
For long-handled tools and smaller outdoor gear on a compact site; shelves require a separate purchase.
For buyers seeking metal construction and an included floor for bulky gear; confirm the doorway and assembled dimensions before purchase.
For buyers wanting a floor, window and vents in a midsize shed; check the dimension diagram because listing measurements differ.
For brooms, long-handled garden tools and other narrow gear; its 17-cubic-foot listing is not suited to mower storage.
For a large collection of yard equipment when an 8-by-12-foot site is available; the listing does not establish that a floor is included.
For midsize metal storage with a wide listed door and four vents; a finished floor is not established in the listing.
For tools and supplies in a narrow outdoor spot; the listing explicitly says a base is not included.
The Rubbermaid 2119053 leads for substantial equipment storage: its listed 337-cubic-foot capacity, included floor and 180-degree-opening doors suit a riding mower or a mix of bikes and yard gear, provided the site can accommodate a roughly 7-by-7-foot shed. (rubbermaid.com) The Keter Factor 213040 is the more space-conscious choice for a push mower or bikes. It has a 54.5-inch-wide entry, an included floor and a narrower 6-by-3-foot format, though Keter requires a foundation. (keter.com) Rubbermaid’s FG5L3000SDONX offers more depth than the Keter for equipment you want to roll straight inside. For upright tools in a small yard, the Suncast BMS5700D and Rubbermaid FG374901OLVSS use height instead of a broad footprint. Metal shoppers should compare the floor-equipped Aoxun G37030BR42A-HJ with the larger Polar Aurora PSS0812BT-C01, whose listing does not establish that a floor is included.
List what must go inside before choosing a nominal shed size. Measure the widest and tallest item—including mower handles or bike handlebars—then compare those measurements with the door opening, not just the exterior width. Leave room to maneuver on the approach and to retrieve something stored at the back. The Keter Factor 213040 illustrates the distinction: Keter lists a 70-inch exterior width, a 64-inch interior width, a 54.5-inch entry width and only 39 inches of interior depth. Its 110-cubic-foot capacity does not mean every object of that volume will pass through the doors. (keter.com) For a riding mower, start with the Rubbermaid 2119053 and check the mower against its doorway diagram. For long tools rather than wheeled equipment, the 17-cubic-foot Rubbermaid FG374901OLVSS makes better use of a very small site.
Floors, airflow and organization solve different problems. The Keter Factor includes a floor and ventilation, while its skylight helps you find gear without adding a separate window. Its shelf supports do not mean shelves come in the kit. The Suncast BMS5700D likewise offers three shelf positions, but shelves are not included; that flexibility is useful if your mix of tools changes. Rubbermaid’s FG5L3000SDONX favors depth for rolling in a mower or bike rather than a minimal footprint. Among metal picks, the Aoxun G37030BR42A-HJ listing specifies a plastic floor, whereas the Patiowell PS1053-BN explicitly omits a base. A lockable door means there is a provision for securing it, not that every model includes a padlock or offers the same level of security.
| Profile | Recommended Product | Why It Fits | Avoid If |
|---|---|---|---|
| Household storing a riding mower alongside bikes or yard equipment | Rubbermaid 2119053 7x7 Resin Shed | The 337-cubic-foot listing, included floor and 180-degree doors favor bulky storage. | Your site cannot accommodate its roughly 7-by-7-foot footprint and door swing. |
| Small-yard owner with a push mower or bikes | Keter Factor 213040 6x3 Shed | A 54.5-inch entry and included floor provide access in a relatively shallow format. | Your largest item exceeds its 39-inch interior depth or you cannot provide the required foundation. |
| Buyer who wants to roll a push mower or adult bike straight in | Rubbermaid FG5L3000SDONX 5x6 Shed | Rubbermaid describes this deeper model specifically for that approach. | Your available space favors a shallow shed or you expect shelves to be included. |
| Gardener organizing long tools and smaller supplies | Suncast BMS5700D 54-Cubic-Foot Vertical Shed | Vertical storage, a reinforced floor and three shelf positions make the space adaptable. | You need shelves included or broad floor space for a mower. |
| Buyer seeking a midsize galvanized-steel shed with a floor | Aoxun G37030BR42A-HJ 8x6 Metal Shed | The listing specifies double doors, upper vents and an interlocking plastic floor. | You cannot confirm that the doorway and foundation plan suit your equipment. |
| Buyer wanting compact metal storage for tools | Patiowell PS1053-BN 5x3 Metal Shed | The nominal 5-by-3-foot size and sloping roof suit a smaller site. | You need a base included or expect to store bulky wheeled equipment. |
Compare exterior dimensions for placement, interior dimensions for storage and door dimensions for access; a single advertised size cannot answer all three questions. Check height under the roof where tall items will actually stand. Then distinguish an included floor from a base frame or a foundation: the DWVO MADWVYwdLa listing describes a metal base but does not clearly establish a finished floor. Where weather conditions matter, look for a rating tied to the exact model rather than a general waterproof claim. Keter specifies up to 65 mph wind resistance and a 15-pound-per-square-foot snow load for the Factor 213040. Those published figures are more useful for comparison than an unspecified all-weather description, but they do not remove the need for proper installation and local-climate judgment. (keter.com)
Choose the location before ordering. The route from the driveway or lawn needs to accommodate the item you plan to store, and doors need room to swing fully without hitting a fence. Prepare the level, stable, well-drained foundation required by the shed instructions; an included plastic floor is not necessarily a substitute. Keter specifies a foundation for the Factor 213040 and lists a minimum foundation size of 68.3 by 44.5 inches. Its product information calls for two people and an electric screwdriver for assembly. (keter.com) Larger kits warrant space to lay out panels and a check of anchoring instructions. Before committing to an 8-by-12-foot Polar Aurora or another large shed, check applicable setbacks, permits and HOA rules. Follow the exact model’s instructions rather than assuming another size in the same range assembles identically.
Resin avoids the rot and rust concerns associated with wood and metal, but its low-maintenance advantage does not eliminate the need to keep doors operating and the site draining. Rubbermaid says its 2119053 resin shed can be cleaned with water and a common nonabrasive household cleaner. (rubbermaid.com) Galvanized-steel options such as the Aoxun G37030BR42A-HJ, DWVO MADWVYwdLa and Patiowell PS1053-BN call for attention to the assembled shell and its finish; inspect joints and any damaged coating according to the product instructions. Keep roof drainage and vents clear, and store moisture-sensitive contents off persistently damp ground. Ventilation can help air circulate, but it is not a guarantee that cushions, paper or unprotected steel tools will remain dry in every climate.
Give the most weight to documentation for the exact model: a parts list, foundation instructions, usable dimensions and stated weather limits are more actionable than broad durability language. Rubbermaid publishes a 10-year limited warranty for the 2119053; read its terms for coverage rather than treating the duration as a promise about every weather event. (rubbermaid.com) Keter provides entry, interior and foundation measurements for the Factor 213040, making it easier to check fit before purchase. Some other listings provide nominal sizes but less clarity about doors or flooring. Where dimensions conflict—as with the Aoxun G37024 listing—ask for the exact variant’s dimension diagram. Do not substitute measurements from a related size or finish.
Filter feedback by the exact model and the job you have in mind. An account of fitting a push mower in the Rubbermaid FG5L3000SDONX is more relevant to mower access than feedback about a smaller Rubbermaid vertical shed. For the Keter Factor 213040, look for details about the 54.5-inch entry, foundation preparation and door alignment. For the Aoxun G37030BR42A-HJ, distinguish comments about its floor-equipped version from those about floorless metal kits. Note whether the writer describes assembly on level ground and names the climate or equipment involved. A useful report explains conditions and a specific outcome; a vague statement that a shed is roomy or weatherproof cannot establish fit for your mower or site.
Do not buy by exterior footprint alone: the roof may extend beyond the walls, the interior is smaller and the entry may be narrower still. Do not count shelves, padlocks or a finished floor unless they are stated as included for the exact variant. An advertised base frame is not necessarily a surface for cushions or equipment. Likewise, avoid treating a floor as permission to place a shed on uneven or poorly drained ground. Check the route to the doorway, the door swing and local placement rules before choosing a large model. Finally, match the shed to the contents: a compact vertical unit is a sensible tool organizer, but its upright capacity cannot replace the floor space and access needed for wheeled equipment.
Is a shed with an included floor ready to sit directly on soil?
Not necessarily. A floor is part of the shed, while the foundation provides a level, stable, drained support beneath it. Follow the exact model’s site-preparation and anchoring instructions; Keter explicitly requires a foundation for the Factor 213040.
Which measurement matters most for storing a mower?
Start with the clear doorway width and height, then check interior depth and the turning space in front of the shed. The Keter Factor 213040 lists a 54.5-inch entry; for larger equipment, compare your mower’s dimensions with the Rubbermaid 2119053 door diagram before buying.
Does a lockable shed come with a lock?
Do not assume so. The Keter Factor 213040 and Rubbermaid FG5L3000SDONX provide for a lock, but their product information says the lock is not included. Check the exact kit contents for other models.
Are vents enough to protect cushions or tools from dampness?
Vents promote airflow but do not replace drainage, proper assembly or appropriate storage for moisture-sensitive items. The Keter Factor and DWVO MADWVYwdLa list ventilation; check their floor arrangements and your site conditions separately.
Choose the Rubbermaid 2119053 7x7 Resin Shed if you need accessible, floor-equipped storage for a riding mower and substantial yard gear, and have the space for it. If yard depth is tighter and your equipment fits its stated doorway and interior, the Keter Factor 213040 6x3 Shed is the more appropriate choice—provided you can install its required foundation.
Related Guides
Compare the best backyard storage sheds for lawn equipment, bikes, seasonal gear, narrow side yards, patios, and large outdoor storage needs.
Read guide
Compare the best resin outdoor storage sheds for tools, bikes, mowers and patio gear, with exact capacity, door, floor, weather and setup tradeoffs.
Read guide
Compare the best storage sheds for backyards, patios, and gardens, with practical picks for tools, bikes, lawn gear, and seasonal equipment.
Read guide
Compare the best barn shed options for backyard storage, workshops, custom wood projects, vehicles, and large outdoor equipment.
Read guide
Compare 10 strong plastic garden sheds for tools, mowers, bikes, patio gear, and larger outdoor equipment, with clear size, door, floor, organization, and setup tradeoffs.
Read guide
Compare the best bicycle storage sheds for 1–5 adult bikes, with practical guidance on capacity, weather protection, anchoring, access, ventilation, and security.
Read guide
Compare the best patio storage boxes, benches and vertical sheds for cushions, pool gear, gardening tools and compact outdoor spaces.
Read guide